Stevens Favorite 1889 / 1894 / 1915
Click here for a description of the differences in the Stevens Favorite models
For an explanation of how these part numbers work for the Favorites, there are 3 basic models depending on when they were manufactured, all are Favorites. Here, we try to use factory part numbers applicable to all (if possible). If the part interchanges with one or more models, we have assigned a suffix letter to the factory part designating whether it can also be used on other models as well. For this purpose we arbitrarily have used the letter (A) for the model 1889, the letter (B) for 1894 & the letter (C) for the 1915. We may also throw in a letter (W) or (N) designating wide, or narrow in the case of extractors. These suffix letters are not factory, but helps eliminate some confusion & allows us to better identify parts for you. For example the firing pin #10AB would be used on either the 1889 or the 1894.
There are two types of receiver screws ( lever, breech bolt.) for the 1889 & 1894. These are the thick head .095″ aprox 3/32″that we see in the early guns. Then the later .065″ aprox 1/16″ that we see in the later guns. measurement of your receiver will tell which screw head is required.
Parts available for this firearm
| Model | Part Number | Part Name | Price | Photo |
|---|---|---|---|---|
| 1915, | 2C | Breech Bolt Screw | 5.00 |
 |
| 1889, 1894, | 19AB | Breech Bolt Screw, ( early, thick head .095 ) | 5.00 |
 |
| 1894, | 19BL | Breech Bolt Screw, ( late, thin head .065 ) | 5.00 |
 |
| 1894, 1915, | 4ABC | Buttplate Screw | 5.00 |
 |
| 1894, | 13B | Extractor – 22 RF – (center style .200 wide, 1st mid style) | 30.00 |
 |
| 1894, | 14B | Extractor – 22 RF – (center style .200 wide, 2nd mid style) | 30.00 |
 |
| 1894, | 14BL | Extractor – 22 RF – (center style .200 wide, 3rd mid style) | 30.00 |
 |
| early 1894, | 13WB | Extractor – 22 RF – (center style .240 wide top .160 bottom) | 30.00 |
 |
| 1889/1894, | 28AB | Extractor – 22 RF – side style (7 o’clock) | out |
 |
| 1894, 1915, | 6 / 9BC | Extractor / Ejector Assembly – 22 RF – ( .240 wide ) | 34.00 |
 |
| 1915, | 10C | Firing Pin – 22 – ( round tip ) | out |
 |
| 1889, 1894, | 10AB | Firing Pin – 22 – (chisel tip) | 18.00 |
 |
| 1894, 1915, | 35ABC | Forearm Screw ( for small 6″ long forearm ) | 4.00 |
 |
| 1915, | 35C | Forearm Screw (for bigger 8″ long forearm ) | 4.00 |
 |
| 1915, | 16C | Hammer / Trigger Screw | out |
 |
| 1889, 1894, | 16AB | Hammer / Trigger Screw, ( thick head .095 ) | 5.00 |
 |
| 1915, | 19C | Lever Screw | 5.00 |
 |
| 1889, 1894, | 19AB | Lever Screw, ( early, thick head .095 ) | 5.00 |
|
| 1894, | 19BL | Lever Screw, ( late, thin head .065 ) | 5.00 |
|
| 1894 (mid), | 12B | Mainspring – (arched, radiused end, with screw hole) | 30.00 |
 |
| 1894 (late), | 12BL | Mainspring – (flat end, with screw hole) | 30.00 |
 |
| 1889, early 1894, | 12AB | Mainspring – (no screw hole) | 26.00 |
 |
| 1915, | 22C | Mainspring – coil type | out |
Photo not available
|
| 1915, | 23C | Mainspring Plunger | 24.00 |
 |
| 1915, | 24C | Mainspring Plunger Seat | 10.00 |
 |
| 1915, | 25C | Mainspring Screw | 4.00 |
 |
| 1894, | 25B | Mainspring Screw, for mainspring with hole | 4.00 |
 |
| 1889, 1894, | 25AB | Mainspring Screw, tall, for no screw hole mainspring | 4.00 |
 |
| 1915, | 27C | Take Down Screw | 16.00 |
 |
| 1889, 1894, 1915, | 36ABC | Tang Screw ( upper and lower 2 required ) | 5.00 |
 |
| 1894, 1915, 44, | 5ABC | Tang Sight Plug Screw, model 1894, 1915, 44 | 5.00 |
Photo not available
|
| 1889, 1894, 1915, | 30ABC | Trigger Spring | 10.00 |
 |
| 1889, 1894, 1915, | 31ABC | Trigger Spring Screw | 4.00 |
 |